PLUSINNO Fishing Rod Holders Review

Last Updated on August 29, 2026 by Daniel Globe

Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.

Finding a secure rod holder is harder when you do not want to drill permanent holes into your boat or kayak. The PLUSINNO BRH02 Fishing Rod Holders use a wide clamp, silicone contact surfaces, and an adjustable rod cradle to give you a removable mounting option. The linked Amazon version is a 2-pack designed for a broad range of rails and flat mounting surfaces. It is a strong choice for stationary and general boat fishing, but the manufacturer specifically says it is not recommended for trolling.

What Is the PLUSINNO BRH02 Fishing Rod Holder?

The PLUSINNO BRH02 is a removable clamp-on rod holder designed to give you a hands-free place to secure a fishing rod without permanently drilling a mounting base into your boat. Its main body uses aluminum-alloy die-cast construction, while marine-grade corrosion-resistant stainless-steel screws are used in the mounting hardware.

The standout feature is the enlarged clamp. It adjusts from 0.59″ to 3.94″, which lets you mount it on many round rails, square rails, flat surfaces, and some irregular mounting points. PLUSINNO also uses a dual-V contact design with anti-slip silicone so the clamp maintains four contact points and is less likely to wobble or mark the mounting surface.

The linked Amazon ASIN is the 2-pack. PLUSINNO also makes other pack-count variants, so check the selected quantity before ordering.

Who Should Buy It?

Design and Stability Features

The dual-V clamp is more than a cosmetic design choice. Instead of relying on one broad flat contact surface, the clamp creates four contact points. PLUSINNO adds anti-slip silicone where the holder meets the boat, increasing friction while helping protect the rail or mounting surface from scratches.

The manufacturer lists a contact area of about 3″ long by 1.75″ wide for the clamp design. That broader silicone-lined interface should be useful when you are mounting the holder on smooth painted rails or tubing where a narrow hard clamp could be more prone to shifting.

The rod-holder section also uses a geared locking design. Once you set your preferred position, the locking mechanism is intended to keep the holder from rotating freely at the mounting base.

Compatibility and Versatility for Various Boats

The 0.59″ to 3.94″ clamp range is one of the BRH02’s strongest buying points. You can use the same basic clamp on many round tubes, square tubes, and suitable flat surfaces instead of buying a mount made for one exact rail diameter.

This makes the holder particularly useful on kayaks, pontoons, small fishing boats, jon boats, and other setups where you have a secure rail or edge to clamp onto. Compatibility still depends on the shape, thickness, and strength of your actual mounting point, so measuring before purchase is better than assuming every rail will fit.

The holder can also rotate vertically and horizontally through 360°, with 10° micro-adjustments. That gives you much more control over rod angle than a simple fixed tube holder.

Rod Security and Protective Strap

A rod holder is only useful if your rod stays where you put it. PLUSINNO includes a protective strap that closes around the rod and reel area to reduce the chance of the setup slipping out of the holder after a sudden pull or boat movement.

The strap uses a quick-release design, so you can secure the rod while waiting and release it when you need to pick the rod up. It is an extra retention feature rather than a reason to ignore proper mounting. Always make sure the clamp itself is fully tightened before loading your rod into the holder.

Ease of Use and Installation

The BRH02 is designed for tool-free mounting. You open the clamp, position it around the rail or surface, tighten the adjustment hardware, and then set the rod-holder angle. This makes it easier to move between boats or change positions during a trip than a permanently drilled mount.

Angle adjustment is another practical advantage. Vertical and horizontal 360° movement gives you flexibility when you want the rod pointed toward the stern, side, or bow. The 10° micro-adjustment positions help you fine-tune the final angle instead of relying on only a few large preset positions.

Tool-free mounting also means you can remove the holder for transport or storage. That is useful on smaller kayaks and boats where permanently protruding accessories can get in the way during loading.

Build Quality and Materials

The main structure uses aluminum-alloy die-casting rather than an all-plastic clamp body. PLUSINNO pairs that with marine-grade corrosion-resistant stainless-steel screws and adjustable locking knobs.

These material choices are appropriate for equipment that will regularly be exposed to spray, humidity, and outdoor storage. Corrosion-resistant does not mean maintenance-free, however. Salt, dirt, and grit can still collect around screws, adjustment points, and silicone surfaces.

A simple care routine is to rinse away salt or debris after use, dry the holder before long-term storage, and occasionally inspect the screws, locking surfaces, and silicone pads. If anything loosens or shows damage, correct the problem before putting a rod back in the holder.

How It Performs in Real Use

Stationary Boat Fishing

This is where the design makes the most sense. Once clamped to a solid rail or flat mounting point, you can set your rod angle and use the protective strap while waiting for a bite. The wide clamp range gives you more mounting choices than a holder designed for one rail diameter.

Kayak Fishing

For a kayak with a compatible rail, tube, or other secure mounting area, the tool-free clamp can be convenient because you do not need to drill into the hull just to add a rod holder. The ability to remove it afterward also keeps your kayak easier to transport and store.

Pontoon and Square-Rail Use

Square tubing can be awkward for conventional round clamps. The BRH02 is specifically designed to accommodate square tubes as well as round tubing, making it relevant for many pontoon rail layouts. You should still verify the rail thickness and make sure the chosen section is structurally suitable for clamping.

Trolling

This is the scenario to avoid. Although an adjustable rod holder may look suitable for trolling, PLUSINNO specifically states that this model is not recommended for trolling fishing. If trolling is central to how you fish, choose a holder whose manufacturer specifically rates or markets it for that use.

Setup Tips Before First Use

• Measure first: Confirm that your mounting point is between 0.59″ and 3.94″ thick or in diameter, depending on its shape.
• Choose a rigid surface: Do not clamp onto trim, thin panels, or flexible parts that move when pressure is applied.
• Keep the silicone clean: Sand or grit trapped between the pad and your boat can reduce grip and may mark the surface.
• Tighten before adjusting: Secure the base first, then set the vertical and horizontal rod angle.
• Use the retention strap: Secure the rod when leaving it unattended in the holder.
• Recheck during the day: Vibration and repeated adjustment can loosen accessories, so periodically confirm the clamp and angle lock remain secure.

Pros and Cons

Check Current Price →

Is It Worth the Price?

The BRH02 sits in a practical mid-range position for anglers who want more adjustability and stronger materials than a very basic plastic holder, but do not want to install a permanent mounting system. You are paying for the enlarged clamp range, die-cast aluminum body, stainless-steel hardware, silicone contact surfaces, angle adjustment, and rod-retention strap.

It offers the most value if you move accessories between different boats or want to avoid drilling. The broad mounting range can also save you from buying different clamps for round and square rails.

It is not the best value for every fishing style. If trolling is your main use, the manufacturer’s limitation means you should spend your money on a holder designed specifically for trolling loads instead.

How It Compares to Alternatives

The Scotty Baitcaster/Spinning family is worth comparing if you prefer a more established modular mounting system. For example, Scotty offers versions with side/deck mounts, square-rail mounts, and clamp mounts. Its 389 configuration uses a clamp with a maximum opening of about 2″, which is narrower than the PLUSINNO’s 3.94″ maximum.

The YakAttack Omega is another option if your kayak or boat already uses an accessory track. It uses YakAttack’s LockNLoad track-mounting system and supports several reel types. The Berkley Boat Rod Holder takes a more traditional approach with a polypropylene holder and side- or top-of-gunnel mounting bracket.

The PLUSINNO makes the most sense when your priority is a removable clamp with a particularly wide adjustment range. A track-mounted YakAttack system or permanently mounted Scotty or Berkley setup may make more sense if your boat is already configured around those mounting standards.

Frequently Asked Questions

The Bottom Line

The PLUSINNO BRH02 is a strong option if you want a removable boat rod holder with a wide 0.59″ to 3.94″ clamp, silicone-lined dual-V mounting contact, tool-free setup, a protective strap, and extensive angle adjustment. It is particularly useful when you need to mount on different rail shapes without committing to a permanent installation.

You should skip it if trolling is the main reason you need a holder or if your boat lacks a solid mounting surface within the clamp range. For general stationary boat and kayak fishing, its combination of mounting flexibility and adjustability earns a recommended-with-caveats verdict.