PLUSINNO Fishing Rod Holders Review

Last Updated on August 29, 2026 by Daniel Globe

Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.

A boat rod holder needs to do more than keep your fishing rod upright. You need secure mounting, useful angle adjustment, easy rod access, and enough retention to reduce the chance of your gear slipping out when the water gets rough. The PLUSINNO 2-in-1 Fishing Rod Holder combines track and deck mounting with a protective rod strap, silicone contact surfaces, and adjustable positioning. Its main advantage is mounting flexibility, although you should confirm your boat or kayak setup before ordering because a track is not included with the standard no-track configuration.

What Is the PLUSINNO 2-in-1 Fishing Rod Holder?

The PLUSINNO 2-in-1 Fishing Rod Holder is an adjustable holder designed for use on compatible boats and kayaks. Its main selling point is the ability to work with either a track-mounted setup or a deck-mounted setup, which can reduce the need to buy separate holders for the two mounting styles.

The design also includes a protective strap that goes over the rod, silicone contact material for added grip, adjustable knobs, and stainless-steel mounting hardware. You can rotate the holder horizontally and vertically through 360° and make smaller 10° positioning adjustments when you need more control over rod angle.

Who Should Buy It?

Features and Benefits of PLUSINNO Fishing Rod Holders

2-in-1 Track and Deck Mounting

The biggest practical advantage is the 2-in-1 mounting design. The holder is intended to work with a compatible track mount or with a deck-mounted installation, giving you more flexibility if you use the same fishing gear across different boats or kayaks.

This does not make the holder universally compatible. Track dimensions, deck thickness, mounting hardware requirements, and available clearance can vary between watercraft, so you should inspect your setup before buying or drilling any mounting holes.

Protective Rod Strap

The built-in protective strap gives you a second point of retention around the rod and reel area. It is designed to help reduce the chance of a rod slipping or bouncing out of the holder while you are fishing, and it can be released when you need to grab the rod.

The strap should still be treated as part of the rod-holder system rather than as a guarantee against lost gear. If your fishing conditions call for an independent rod leash or other safety measure, use the appropriate equipment for your boat, kayak, and local conditions.

Silicone Contact Surface

PLUSINNO uses silicone at contact points to increase friction and help protect the mounting surface from scratches. This is especially useful when the holder is installed where hard mounting components could otherwise rub against a finished boat or kayak surface.

Silicone does not remove the need for correct tightening. A loose mount can still move under load, while excessive tightening may stress the mounting surface. Follow the installation instructions and check the holder periodically during use.

Installation and Adjustability

The holder is designed for installation on either a compatible track or a suitable deck location. Manufacturer information describes quick installation and flexible adjustment knobs, while the track-mounted configuration uses a T-screw that can slide along the track before being tightened in place.

Once mounted, the holder offers 360° horizontal and vertical adjustment plus 10° fine-angle changes. That range can help you position your rod for different seating positions, casting directions, trolling layouts, or stationary bait fishing without forcing you to work around one fixed rod angle.

Setup Tips Before First Use

• Confirm the mounting system: Identify whether you are using the track-mount or deck-mount configuration before installation.
• Check clearance: Make sure the rod and reel can rotate without hitting your seat, paddle, console, electronics, or other accessories.
• Test the protective strap: Practice securing and releasing your rod before heading onto the water.
• Check fasteners: Make sure mounting hardware is properly tightened before use and inspect it again during longer trips.
• Follow the manufacturer’s instructions: Use the correct hardware and installation procedure for your specific mounting surface.

Durability and Quality Assessment

The original version of this review described the complete holder as marine-grade stainless steel, but that overstates the verified construction. Current product information supports a plastic holder body combined with marine-grade, corrosion-resistant stainless-steel T-screws and four fixing screws.

That combination makes sense for a boat or kayak accessory because the plastic body keeps the assembly from becoming an unnecessarily heavy block of metal, while stainless hardware addresses the parts that secure and adjust the mount. The silicone contact areas also reduce direct hard-surface contact where the holder meets the boat or mounting system.

For saltwater use, corrosion-resistant hardware is helpful, but it does not make maintenance unnecessary. Rinsing exposed fishing accessories with fresh water after salt exposure, drying them, and checking the fasteners regularly can help you identify salt buildup, wear, or loosening before the next trip.

How It Performs in Real Use

For Kayak Fishing

The track-mount option is useful on kayaks with compatible accessory tracks because you can position the holder where it is reachable from your seat. The 360° adjustment also lets you change rod direction without moving the entire mount, while the protective strap adds retention when the kayak rocks or changes direction.

For Boat Fishing

On a suitable boat deck, the deck-mount option gives you an alternative when a track is not available. This can be useful when you want a more permanent rod-holder position, but deck installation deserves more planning because you need adequate mounting clearance and a suitable surface for the hardware.

For Trolling or Waiting on Bait

The combination of broad 360° movement and 10° fine adjustments is useful when the rod needs to sit at a deliberate angle rather than simply pointing straight out from the boat. Fine adjustments can also help you keep multiple rod positions organized when space permits.

For Rougher Water

The rod strap gives you added retention compared with an open holder, but you should still use sensible gear-security practices for the conditions. Do not assume the holder or strap is rated for trailering, high-speed transport, or loads beyond normal fishing use unless the manufacturer specifically states that for your configuration.

Compatibility and Safety

PLUSINNO markets this model for boat and kayak use with both track and deck mounting, but the phrase “fits most boats” should not be read as a guaranteed universal fit. Tracks differ between manufacturers, and deck installations depend on the available space, surface construction, hardware access, and surrounding equipment.

You should also avoid relying on an unspecified load rating. A verified maximum rod-holder weight capacity was not available for this review, so anglers using unusually heavy offshore tackle or equipment that places high leverage on the holder should confirm suitability with the manufacturer before use.

Inspect the holder, strap, knobs, and fasteners before each trip. If you notice cracks, damaged hardware, excessive movement, or a strap that no longer secures the rod correctly, address the problem before putting valuable fishing gear in the holder.

Pros and Cons

Check Current Price →

Is It Worth the Price?

The PLUSINNO 2-in-1 holder makes the most sense as a mid-range fishing accessory for buyers who value mounting flexibility and rod retention more than an all-metal construction. Instead of requiring you to choose a dedicated track holder or a separate deck holder from the start, its 2-in-1 design gives you both installation approaches in one product family.

It offers strong value for the price if you will actually use the adjustable positioning, protective strap, and dual mounting options. It is less compelling if you need a specific proprietary mounting ecosystem, an all-metal body, or a published heavy-load rating for large offshore equipment.

How It Compares to Alternatives

The YakAttack Omega is worth comparing if your priority is a track-mounted LockNLoad setup within the YakAttack accessory system. The Scotty 280 Baitcaster/Spinning Rod Holder is another established option with a side/deck mount, adjustable positioning, and a soft latching strap. RAILBLAZA’s Rod Holder II is suited to buyers who prefer the company’s modular StarPort mounting ecosystem.

The PLUSINNO model stands out when your priority is having track and deck mounting capability in one holder design while also getting a protective strap and fine-angle adjustment. If you already have a large collection of accessories from YakAttack, Scotty, or RAILBLAZA, staying within that existing mounting ecosystem may be more convenient.

Frequently Asked Questions

The Bottom Line

The PLUSINNO 2-in-1 Fishing Rod Holder is worth considering if you want flexible track/deck mounting, 360° positioning, 10° fine adjustments, silicone contact protection, and a rod-retention strap in one setup. It is less suitable if you need guaranteed compatibility without measuring your mount, require a full-metal holder, or need a verified heavy-load specification.

For a compatible boat or kayak, its combination of mounting flexibility and adjustable rod positioning is the main reason to choose it. Check your mounting system and selected package before you buy, especially because the standard no-track configuration does not include a track.