Last Updated on July 31, 2026 by Daniel Globe
Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
A loose or awkwardly positioned fishing rod can turn a calm day on your kayak or boat into a constant gear-management problem. The PLUSINNO 2 in 1 Fishing Rod Holders are designed to give you a secure resting point with track-mount and deck-mount options, a protective strap, and wide angle adjustment. This review explains how the mounting system, silicone contact pads, adjustment controls, and stainless-steel hardware affect everyday use. The design is practical, but you still need to confirm your boat’s mounting surface and the exact package variant before ordering.
Quick Verdict
Rating: 8/10, recommended with caveats
Best For: Kayak and small-boat anglers who want flexible rod positioning and a retaining strap.
Bottom Line: The 2 in 1 mounting design, 360° movement, and 10° adjustment steps give you useful control over rod position. The main tradeoff is compatibility, because track dimensions, deck placement, and included mounting parts can vary by setup and listing variant.
| Specification | Detail |
|---|---|
| Brand | PLUSINNO |
| Product type | Adjustable fishing rod holder for kayaks and boats |
| Mounting design | 2 in 1 track-mount or deck-mount configuration |
| Rotation | 360° horizontal and vertical positioning |
| Angle adjustment | 10° increments |
| Rod retention | Protective strap for securing the rod and reel |
| Contact protection | Silicone gaskets designed to increase friction and reduce scratching |
| Hardware | Corrosion-resistant marine-grade stainless-steel screws and fixing hardware |
| Adjustment controls | Flexible knobs for changing and locking the angle |
| Typical setup time | About 10 minutes when the mounting point is ready |
| Best use | Holding a rod while waiting for bites, organizing deck space, and keeping a rod within reach |
| Package note | Track pieces and holder quantity may depend on the selected listing variant. Confirm the option before checkout. |
What Is the PLUSINNO 2 in 1 Fishing Rod Holder?
The PLUSINNO 2 in 1 Fishing Rod Holder is a mounting accessory that keeps your fishing rod supported on a kayak or boat. Its base can work with a compatible track or a fixed deck position, so you are not limited to one installation style.
The holder is built around three practical functions: positioning, grip, and retention. You can rotate it horizontally and vertically, make smaller changes in 10° steps, and use the strap to help keep the rod and reel in place. Silicone gaskets increase contact and friction at the mounting area, while stainless-steel screws and fixing hardware are intended to resist corrosion.
Before You Buy: Check your track width, available deck space, bolt access, and selected package. A holder described as track-compatible is not automatically a fit for every rail system, and some variants may not include track sections.
Who Should Buy It?
Best For
- You fish from a kayak or small boat with a compatible accessory track or a suitable deck-mount location.
- You want to change rod angle without removing the entire holder.
- You prefer a holder with both a friction-enhancing gasket and a rod-retaining strap.
Skip If
- Your boat has no compatible track and you cannot safely drill or through-bolt a deck mount.
- You need a published load rating for heavy trolling pressure or large offshore tackle.
- You want a confirmed universal fit without measuring your rail, deck, rod handle, and reel clearance.
Mounting Versatility and Compatibility
The 2 in 1 design is the main reason to consider this holder. A track mount lets you slide or reposition the holder along a compatible rail, while a fixed deck mount gives you a more permanent location. This flexibility can help when you own more than one small watercraft or want different positions for trolling, casting, and waiting for bites.
Compatibility still requires a careful check. Track profiles are not identical, and a deck installation needs enough flat surface, clearance below the deck, and a secure fastening method. Inflatable craft need special attention because you should not drill into an air chamber or attach hardware to a flexible surface unless the boat maker approves a dedicated mounting base.
Adjustability and Rod Positioning
The holder provides 360° movement in both horizontal and vertical directions. You can face the rod forward, outward, or closer to your seat, then use 10° increments to refine the angle. The stepped adjustment is useful when you want repeatable positions instead of relying on a completely free-moving joint.
Angle control also affects comfort. A holder placed too far forward can make rod retrieval awkward, while one placed too close can interfere with paddling, pedal drives, or landing a fish. The flexible knobs let you change the position without a long setup process, but each knob and fastener should be tightened before you put pressure on the rod.
Stability and Protection for Your Fishing Gear
Silicone gaskets increase the contact area between connected parts and add friction. This can reduce unwanted shifting while also placing a softer layer between the mount and your boat. The design is intended to improve grip without leaving scratches at the contact point.
The protective strap adds a second layer of security by holding the rod and reel against the holder. It is especially useful when you move through wake, reach for other gear, or fight a fish from a seated position. The strap is not a substitute for a separate leash in rough conditions, and you should confirm that it is fully engaged before releasing the rod.
Pro Tip: Sit in your normal fishing position before tightening the mount. Check paddle or pedal clearance, rod-tip direction, reel-handle space, and how easily you can release the strap with one hand.
Installation and Setup
Installation can take about 10 minutes when your track or deck location is already prepared. A track setup is usually the simpler option because it avoids drilling and allows later repositioning. A deck setup may take longer because you need to mark the location, confirm underside access, and use appropriate fasteners for your hull or deck material.
Start with the holder unloaded. Secure the base, move the holder through its full range, and check that it does not hit your seat, paddle, pedal drive, electronics, or gunwale. Add the rod only after the base and angle controls stay firm through repeated movement.
Setup Tips Before First Use
- Measure first: Confirm the track profile or deck footprint before ordering and drilling.
- Test the full swing: Rotate the holder through 360° to find interference points.
- Check reel clearance: Make sure the reel body and handle do not press against the mount.
- Use the strap: Secure the rod whenever you take your hand off it.
- Recheck fasteners: Inspect the knobs and screws after your first trip and at regular intervals.
Build Quality, Materials, and Care
The verified material claim applies most clearly to the screws and fixing hardware, which are described as marine-grade, corrosion-resistant stainless steel. The holder also uses silicone gaskets and flexible adjustment knobs. The complete body material is not stated consistently enough to treat the entire holder as stainless steel.
Corrosion-resistant hardware still needs basic care. After saltwater use, rinse the holder and fasteners with fresh water, remove sand or grit from moving joints, and let the assembly dry before storage. Check the strap, silicone contact surfaces, knobs, and screw threads for wear before each trip.
No verified load rating is provided in the source material. For heavy trolling loads, large conventional reels, or offshore use, choose a holder with a published rating and a mounting system designed for that level of force.
How It Performs in Real Use
For Kayak Fishing
The adjustable base can help you keep a rod close without laying it across your lap or deck. Track mounting is especially useful when you need to move the holder to clear your paddle stroke, pedal system, fish finder, or landing area. The strap is valuable when wake or body movement could shift an unattended rod.
For Small-Boat Fishing
A deck-mounted position can give you a dedicated place for a rod while you organize tackle or wait for a bite. The 360° movement lets you point the rod away from other anglers and change the vertical angle for better line clearance. You still need a strong mounting surface and enough backing support below the deck.
For Waiting for Bites
The 10° steps make it easier to set a comfortable, repeatable angle. You can raise the rod to improve visibility of the tip or lower it to reduce obstruction. For active trolling or hard strikes, do not rely on the holder without checking the mount, drag setting, strap, and intended load.
For Transport and Storage
The holder is useful for on-water organization, but it should not automatically be treated as a road-transport rack. Remove the rod before trailering or driving unless your boat and accessory manufacturer specifically approve that use. During storage, loosen packed-in grit and keep the moving parts dry.
Pros and Cons
Pros
- Track-mount and deck-mount options cover more than one installation style.
- 360° movement and 10° steps provide broad, repeatable positioning.
- Silicone gaskets add friction and help protect contact surfaces.
- The retaining strap helps keep the rod and reel in the holder.
- Stainless-steel screws and fixing hardware are designed to resist corrosion.
Cons
- Track fit and included parts can vary, so you must confirm the selected package.
- No verified weight or trolling-load rating is provided.
- Deck mounting may require drilling, underside access, and extra installation care.
Is It Worth the Price?
The PLUSINNO holder offers strong value when you need one adjustable design that can work with either a compatible track or a fixed deck position. You get useful buyer-focused features, including a retaining strap, silicone contact protection, corrosion-resistant hardware, and fine angle control.
You get the most value when your boat already has a compatible track or a suitable deck location. It is less attractive when you need extra adapters, cannot verify rail fit, or plan to use heavy tackle that requires a published load rating.
How It Compares to Alternatives
The Scotty Baitcaster/Spinning Rod Holder, RAILBLAZA Rod Holder R, and YakAttack Omega Rod Holder are established alternatives with their own mounting ecosystems. They may make more sense when your kayak already uses one of those branded bases or when you want a wider accessory system built around the same mount.
The PLUSINNO model is more appealing when you value the 2 in 1 track/deck approach, 10° adjustment steps, silicone gasket contact, and an included protective strap. Your best choice depends less on brand name and more on mount compatibility, rod fit, load needs, and how much repositioning you expect.
Frequently Asked Questions
Does it fit every kayak track?
No universal fit is confirmed. Measure your track profile and compare it with the selected mounting hardware before ordering. You may need a different adapter for some rail systems.
Can you install it without drilling?
A compatible track mount can avoid drilling. A fixed deck installation may require holes and secure backing, so follow your boat manufacturer’s guidance and use hardware suited to the deck material.
What fishing rods work with this holder?
The product is marketed for most common fishing rods, but handle shape, reel size, trigger grip, and balance can affect fit. Test the rod in the holder before relying on it in rough water or under load.
Can you use it on an inflatable boat?
Only use it with an approved rigid track, accessory pad, or mounting base made for your inflatable craft. Do not drill into an air chamber or clamp the holder to a flexible surface that cannot support the load.
Is it suitable for saltwater?
The screws and fixing hardware are described as marine-grade and corrosion-resistant. Rinse the complete holder with fresh water after saltwater use, dry it, and inspect the joints and fasteners regularly.
How much weight can it support?
A verified load rating is not provided in the available product information. Avoid assuming it is suitable for heavy trolling or large offshore tackle, and choose a rated system when load capacity is critical.
Are tracks included in the package?
Package contents can vary by selected option. Confirm the holder count, track pieces, screws, and other mounting parts shown for the exact variant in your cart before checkout.
What warranty does PLUSINNO provide?
A specific warranty term is not verified in the available listing details. Check the current Amazon listing and PLUSINNO support information for the coverage that applies to your seller, country, and purchase date.
The Bottom Line
The PLUSINNO 2 in 1 Fishing Rod Holder is a practical choice when you want flexible track or deck mounting, broad angle adjustment, and a strap that helps retain your rod. Skip it when you need guaranteed universal compatibility or a published heavy-load rating, because mounting fit and package contents require careful checking.
Ready to Buy?
Check the latest price, selected variant, and included mounting parts before you decide.