Last Updated on July 31, 2026 by Daniel Globe
Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
A slippery or toothy fish can make hook removal harder and increase the chance of a dropped catch or an injured hand. The GNDROO 2 Packs 3 Claw Fish Gripper gives you two compact metal control tools with blue and red plastic-covered handles. Its three-claw head is designed to hold a fish while you remove a hook, measure the catch, or prepare for a quick photo. The design is practical for many small to medium catches, but it should not be used to suspend a large fish by the mouth.
Quick Verdict
Rating: Recommended with caveats
Best For: Anglers who want an inexpensive two-pack for basic fish control and hook removal
Bottom Line: The three-claw metal design and ergonomic grips give you more control than using bare hands alone. The tradeoff is that this simple tool has no built-in scale, no stated warranty, and may feel awkward on very small or heavy fish.
Key Specifications
| Specification | Detail |
|---|---|
| Brand | GNDROO |
| Model name | Fish Gripper |
| ASIN | B0CYL4SRCX |
| Product type | Three-claw fish control gripper |
| Quantity | 2 grippers |
| Main material | Metal |
| Handle covering | Blue and red plastic grips |
| Listed item weight | 4.8 ounces |
| Suggested use | Holding fish for hook removal, measuring, and brief photos |
| Water use | Freshwater and saltwater, with cleaning after use |
| Warranty | No warranty is stated on the listing |
What Is the GNDROO Fish Gripper?
The GNDROO Fish Gripper is a manual fish-control tool sold as a two-pack. Each unit uses three metal claws and a plastic-covered handle to help you control a catch without placing your fingers close to the hook or mouth.
This is not a fishing scale, hook remover, landing net, or replacement for fish-handling pliers. It is an add-on control tool that can steady a fish while you use the correct tool for the next step. The two-pack is useful when you want one gripper in a tackle bag and another on a boat, kayak, or backup kit.
Who Should Buy It?
Best For
- Freshwater anglers who handle common small to medium catches
- Boat, bank, and kayak anglers who want a compact backup tool
- Households that prefer a two-pack for separate tackle kits
Skip If
- You need a gripper with a built-in scale, ruler, or rotating handle
- You mainly handle large fish that require full-body support
- You want a clearly stated manufacturer warranty
Before You Buy: A lip gripper should help control a fish, not carry its full body weight. Support larger catches horizontally with your other hand and keep handling time short.
Features and Design of the Fish Gripper
Three-Claw Control Head
The main feature is the three-claw metal head. The claws close around the fish rather than relying on a single narrow contact point. This can give you a steadier hold while backing out a hook or moving the fish into position for a measurement.
The claw shape is also the main fit limitation. A very small mouth may not give the head enough room to sit comfortably, while a large or powerful fish may place more load on the tool than you should apply. Use gentle pressure and stop if the fit looks forced.
Metal Build and Plastic-Covered Grip
The listing identifies metal as the main material and describes the tool as corrosion-resistant. The black metal body is paired with blue and red plastic-covered handles, giving each gripper a distinct color and a wider contact surface for your hand.
Corrosion resistance does not mean maintenance-free. Salt, sand, fish residue, and moisture can still collect around the claw joints. Rinse the gripper with fresh water after each saltwater trip, dry it fully, and store it open in a ventilated tackle compartment.
Compact Two-Pack Design
The listed item weight is 4.8 ounces, so the pair should not add much bulk to a tackle bag. The two-pack also lets you separate the tools by location or purpose. You can keep one with your main pliers and leave the second in a travel kit or loaner setup.
The listing does not identify a sheath, lanyard, or locking storage case. Pack the claws where they cannot snag line, soft plastics, or your hand when you reach into the bag.
Benefits of Using the Fish Gripper
A gripper can create distance between your hand and a moving hook. That is useful when a fish is twisting, the lure has multiple exposed points, or you need a moment to reach for needle-nose pliers. It can also reduce the need to squeeze the fish’s body with your bare hand.
The tool is most useful as part of a complete handling setup. Pair it with hook-removal pliers, a rubber landing net, and a separate scale or measuring board. The gripper provides control, while those other tools handle landing, dehooking, weighing, and measuring.
How It Performs in Real Use
For Hook Removal
Close the claws only enough to control movement, then use pliers or a hook remover to back the hook out. This approach keeps your gripping hand farther from the hook and gives your tool hand a clearer working angle.
For Catch-and-Release Photos
The gripper can help position a fish for a brief photo, but it should not be the only support point. Prepare the camera first, keep the fish close to the water, and support the body horizontally with your free hand before lifting.
For Bank, Boat, and Kayak Storage
The compact pair is easy to divide between kits. On a kayak or small boat, store the gripper where you can reach it without opening a crowded box. Because the listing does not state that it floats, secure it in a tray, pocket, or tethered tool area.
For Saltwater Trips
The listing presents the gripper for freshwater and saltwater use. Saltwater anglers should still treat the metal construction as a maintenance item. A fresh-water rinse and complete drying after every outing will reduce residue around moving and contact points.
How to Use It Correctly
- Prepare first: Place your pliers, measuring board, or camera within reach before lifting or repositioning the fish.
- Control the head: Keep the fish in or just above the water when possible, then place the claws carefully around a suitable lip area.
- Use light pressure: Close the handle only enough to prevent slipping. Do not crush, twist, or force the claw into a small mouth.
- Support the body: Use your free hand beneath the fish when its weight cannot be safely supported near the mouth.
- Finish quickly: Remove the hook, take the measurement or photo, and return the fish to the water without delay.
- Clean the tool: Rinse off fish residue, mud, and salt, then dry the metal before storage.
Pro Tip: Set your pliers and camera within reach before gripping the fish. Good preparation shortens handling time and reduces the chance of dropping the catch while searching through your tackle.
Compatibility and Fish Safety
The product title targets most freshwater fish, and the listing also describes saltwater use. Actual fit depends on the size and shape of the fish’s mouth, not only the species name. Check the contact point before applying pressure, especially with small fish or species with delicate jaw structures.
For catch and release, keep the fish wet, avoid its eyes and gills, and limit time out of the water. A gripper can assist with control, but it does not make a vertical one-point hold safe for every fish. Larger catches need horizontal support along the body.
User Experience and Customer Feedback
Buyer feedback commonly praises the concept, the grip, and the convenience of keeping the tool in a bag. Some comments also describe the gripper as awkward on smaller fish or raise questions about long-term durability. That mix fits the product’s simple design: it is useful when the claw matches the fish, but it will not replace every handling method.
The original article’s 4.5-star rating and 196-review count were removed because the current listing data has changed. Ratings and review totals can move over time, so you should check the live product page before using them in a buying decision.
Pros and Cons
Pros
- Two grippers are included for separate kits or backup use
- Three-claw head offers more control than bare-hand handling alone
- Metal construction with comfortable blue and red handle coverings
- Compact 4.8-ounce listed weight suits mobile tackle setups
- Useful for hook removal, measuring, and brief photo preparation
Cons
- May feel awkward or oversized on very small fish
- No built-in scale, ruler, sheath, or stated warranty
- Metal parts still need rinsing and drying after saltwater use
Is It Worth the Price?
This GNDROO two-pack sits in the basic, value-focused end of the fish-gripper category. It makes the most sense when you want two simple control tools rather than one feature-heavy model with a scale, rotating handle, or premium landing system.
You get the strongest value if you can use one gripper in each of two tackle setups. It is less compelling when you need a verified weight capacity, a floating body, a wrist lanyard, or a long manufacturer warranty.
How It Compares to Alternatives
The Rapala Floating Fish Gripper is a better comparison for buyers who prioritize a molded corrosion-resistant body, one-hand release, and a wrist lanyard. The original Fish Grip is another option when you want a floating lip gripper in multiple sizes.
The GNDROO set makes more sense when your priority is getting two compact metal claw-style tools. A Berkley Big Game Fish Lip Grip is better suited to shoppers who want a larger dedicated lip-grip design and are willing to move beyond a basic two-pack.
Frequently Asked Questions
How many fish grippers are included?
The selected listing includes two GNDROO fish grippers. The pair is useful for keeping one in your main tackle bag and another in a backup, boat, or travel kit.
Does the gripper have a built-in scale?
No built-in scale is listed. You can use the gripper to control a fish while preparing a separate scale, but you should follow the scale maker’s instructions and support the fish correctly.
What is the verified weight capacity?
The listing does not state a verified load capacity. Do not rely on the unsupported 20-pound claim from the original article, and do not use the tool as the only support point for a heavy fish.
Can you use it in saltwater?
The listing describes both freshwater and saltwater use. Rinse the metal with fresh water after a saltwater trip, dry it completely, and inspect the claws and joints before the next outing.
Is the claw adjustable for different fish sizes?
The listing does not describe an adjustable jaw-size setting. The claws open and close through the handle, but the physical head size remains fixed, so fit will vary with the fish’s mouth.
How should you clean the fish gripper?
Rinse away fish residue, mud, and salt with fresh water. Dry the tool fully before storage, and check the metal contact points for roughness, corrosion, or damage.
Does GNDROO provide a warranty?
No manufacturer warranty is stated in the product details reviewed for this article. Check the current Amazon listing and seller return terms before ordering because policies can change.
Who should skip this fish gripper?
Skip it if you need a floating gripper, a built-in scale, a published load rating, or a tool for lifting large fish vertically. It is better treated as a light control aid within a complete fish-handling kit.
The Bottom Line
The GNDROO 2 Packs 3 Claw Fish Gripper is worth considering when you want two compact metal tools for basic fish control, hook-removal support, and quick handling tasks. Its three-claw head and comfortable grips are useful strengths, but buyers who need verified load capacity, integrated measurement features, or a stated warranty should choose a more specialized alternative.
Ready to Buy?
Check the latest price, selected variant, and product details before you decide.