Dazakoot 1250LBS Magnet Fishing Kit Review

Last Updated on August 28, 2026 by Daniel Globe

Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.

A magnet-fishing kit needs more than an impressive pull-force number. You also need a practical rope, secure attachment hardware, useful accessories, and a magnet you can maintain after repeated trips to the water. The Dazakoot 1250lb Double Side Magnet Fishing Kit, model DK-SM75, combines a compact 3-inch N52 neodymium magnet with a 100FT nylon rope and a collection of setup and cleanup accessories. Its main strength is the complete double-sided setup, although you should treat the advertised 1,250-pound pull-force figure as a product specification rather than a guarantee of what you can lift from a lake or river.

Key Features and Specifications

What Is the Dazakoot 1250lb Double Side Magnet Fishing Kit?

The Dazakoot DK-SM75 is a compact double-sided fishing magnet designed for retrieving magnetic metal objects from rivers, lakes, docks, piers, and other suitable locations. The magnet measures 3 inches across and 1.26 inches thick, giving you a relatively compact body paired with a stated pull-force rating of about 1,250 pounds.

The current Amazon listing identifies the magnet as N52 neodymium and describes a Ni+Cu+Ni triple-layer coating intended to improve corrosion resistance. You also get a 100FT nylon rope, which gives you considerably more reach than a short dock-only setup and makes the kit practical for bridges or banks where the water is well below you.

Who Should Buy It?

Magnet Design and Build Quality

The main hardware is a round, double-sided neodymium magnet. A double-sided design gives you magnetic contact on two broad faces instead of concentrating the design around only one active face. That can be helpful when you drag the magnet horizontally across a river or lake bottom because the magnet can approach metal from more than one side.

Dazakoot describes the surface as having a Ni+Cu+Ni triple-layer coating. This coating is intended to resist corrosion, but it should not be treated as permission to store the magnet wet. Scratches, impacts, grit, and repeated exposure to water can wear any protective surface over time.

Understanding the 1,250-Pound Pull-Force Claim

The headline specification is approximately 1,250 pounds of pull force. That is useful for comparing this model with other magnets, but it should not be interpreted as a promise that you can attach the magnet to any 1,250-pound object and lift it from the water.

Actual holding force depends on how much of the magnet touches the object, the thickness and shape of the metal, surface rust, paint, mud, debris, and the direction in which you pull. A flat, clean steel surface creates a much better magnetic connection than a curved, corroded object touching only a small part of the magnet.

This distinction matters when you are choosing a magnet based mainly on a large pull-force number. The Dazakoot has substantial stated magnetic strength, but technique and contact quality remain important during real recovery work.

Rope, Carabiners, and Included Accessories

The kit includes a 100FT nylon rope with two locking carabiners. The extra rope length can help when you are working from a bridge, tall riverbank, pier, or other location where the water is not directly below your hands.

The listing also describes non-slip gloves, threadlocker, a plastic scraper, tape, a towel, an instruction manual, and a portable carrying bag. These are sensible accessories for a magnet-fishing kit because setup does not end with tying a rope to the magnet. The eyebolt needs to remain secure, small metal fragments need to be removed, and the magnet should be cleaned and dried before storage.

Where This Magnet Fishing Kit Makes Sense

Dazakoot markets the kit for underwater salvage and metal recovery in rivers, lakes, and ocean environments. The same magnetic tool can also help locate lost ferrous metal parts around a workshop, yard, or similar work area when the object is accessible to the magnet.

The double-sided design is most useful when you want to search an area instead of simply dropping a magnet straight down. Dragging the magnet gives its active surfaces more opportunities to contact metal along the bottom.

How It Performs in Real Use

Dragging Along a River or Lake Bottom

This is where a double-sided magnet makes the most sense. You can pull it across the bottom so one of the magnetic faces has a chance to contact ferrous objects. The 100FT rope also gives you enough line to work a reasonably broad area from shore or a bridge.

Vertical Drops From a Dock or Pier

The magnet can also be lowered vertically near docks, piers, and similar structures. In this situation, control matters more than simply throwing as far as possible. A controlled drop can reduce unnecessary impacts against concrete, rocks, or structural metal.

Recovering Small Metal Objects

The kit can be useful for finding tools, hardware, and other magnetic metal pieces when you already have a reasonable idea of where they were lost. The included plastic scraper is useful after retrieval because small filings and sharp metal fragments can cling tightly to a strong magnet.

Freshwater and Saltwater Trips

The listing describes the Ni+Cu+Ni coating as suitable for freshwater and salty-water use. Salt exposure still makes post-use care especially important. Rinse away residue, dry the magnet and hardware thoroughly, and inspect the coating before storage.

Setup Tips Before First Use

Start by reading the included instructions and checking the attachment hardware. Make sure the eyebolt is fully seated and use the supplied threadlocker as directed. Inspect the rope for damage and confirm that the carabiner is locked before lowering or casting the magnet.

Keep your rope organized rather than allowing the full 100FT length to tangle around your feet. When you retrieve the magnet, pull steadily. Sudden jerks can put extra stress on the rope, connection points, and whatever object is attached.

After each session, use the plastic scraper for stubborn metal fragments instead of relying only on your fingers. Clean and dry the magnet, rope hardware, and other wet components before packing everything into the carrying bag.

Compatibility and Safety

A magnet this strong deserves careful handling. Use the included gloves and keep your fingers clear of the space between the magnet and large steel objects. The magnetic attraction can become sudden when the magnet gets close enough to a suitable metal surface.

Inspect the rope, carabiners, eyebolt, and magnet body for damage before every use. Do not rely on the advertised pull-force number as a safe working-load rating for the rope, carabiners, bridges, railings, or other equipment. Follow the manufacturer’s setup instructions and the rules that apply at the location where you plan to magnet fish.

If you recover an unknown, sharp, hazardous, or potentially dangerous object, avoid unnecessary handling and use appropriate local guidance rather than trying to clean or open it yourself.

Cleaning and Maintenance

Maintenance is simple but important. After freshwater use, remove mud and metal debris, wipe the magnet clean, and dry it thoroughly. After saltwater exposure, rinse away salt residue with fresh water before drying the magnet and hardware.

Check the coating for chips or deep scratches and inspect the rope for abrasion. Also confirm that the eyebolt has not started to loosen. These quick checks can help you notice wear before your next trip rather than discovering a problem while the magnet is underwater.

Quality Assurance and Support

The current Amazon product description includes satisfaction-guarantee language referring to replacement or refund service if a customer is dissatisfied. Treat that as seller or manufacturer support wording rather than a permanent warranty specification, since return and support terms can change.

Before buying, check the current Amazon listing for the applicable seller, return conditions, package contents, and any updated support information.

Pros and Cons

Check Current Price →

Is It Worth the Price?

The Dazakoot kit makes the strongest value case for buyers who would otherwise need to purchase a magnet, long rope, carabiners, gloves, threadlocker, scraper, and storage gear separately. The 100FT rope is especially useful if your fishing locations require more reach than a short starter rope can provide.

It is worth considering if you specifically want a double-sided 1,250-pound-class magnet kit and prefer an all-in-one bundle. It is less compelling if you already own high-quality rope and accessories or if your fishing style is based mainly on straight vertical drops with a single-sided magnet.

How It Compares to Alternatives

The Brute Magnetics 1200 lb Brute Box Kit takes a different approach. It uses a 1,200-pound single-sided magnet with a 65FT rope, so it may suit buyers who favor concentrated vertical pulling rather than a double-sided dragging design.

The Magnetar Bulldog 500 is a closer design comparison because it is also double-sided. Magnetar lists 1,100 pounds of combined pulling force and a 65FT rope. The Dazakoot gives you a longer 100FT rope and a higher advertised pull-force figure, while the Bulldog provides clearer manufacturer documentation about how its double-sided force is divided. Your better choice depends on whether rope reach, documentation, magnet configuration, or accessory preferences matter most to you.

Frequently Asked Questions

The Bottom Line

The Dazakoot 1250lb Double Side Magnet Fishing Kit is a solid choice if you want a compact double-sided N52 magnet, a long 100FT rope, and a useful group of setup and cleanup accessories in one package. Its biggest strength is the combination of magnetic contact and kit completeness, while its main limitation is that the 1,250-pound specification should not be mistaken for guaranteed real-world lifting capacity. Buyers who want a complete double-sided setup should consider it, while those who prefer concentrated single-sided lifting or more detailed load documentation may want to compare alternatives first.